Portable Clearance Monitor

The SFExplorIR is a continuous-motion, continuous-read monitor with an integrated battery pack and bright backlit LCD diagnostic display of 0.1 ppm resolution. Continuous sensor validation (P, T, V) assures accurate readings. An audible alarm indicates 5ppm sulfuryl fluoride levels.

SFExplorIR Controls
1. Indicator Lights
Alarm, System Fault and Monitor On(flashes during warm-up)
2. Silence/Escape
Temporarily silence the audible alarm OR return to the previous screen without saving data
3. Display Screen
Backlit LCD
4. Enter
Control/Setup Menu Mode: press to save values
5. Keypad
Control/Setup Menu Mode: Move the arrow on the display screen to the desired function, scroll through data, or change a function’s value

Product Specifications

Gas Specifications
Product TypePortable Sulfuryl Fluoride (SO2F2) Clearance Monitor
Measuring Range0 to 100 ppm
Detector TypeNDIR (Non-Dispersive Infrared)
Accuracy< 1 ppm (minimum)
Interface
Displaysbright, back-lit LCD & 3 indicator lights
Audible AlarmInternal audible alarm factory set (5 ppm)
Electronics Specifications
Response Time90% of response within 5 seconds; 100% in 7 seconds
Warm-up Time90% of response within 5 seconds; 100% in 7 seconds
Operating Time30 plus minutes before the purge-air bag needs refilling
PowerDC power pack, provides at least 8 hours of operation
Power Consumption15 Watts
Physical Specifications
System NoiseLess than 40dB(A) at 10 ft (3 m)
Operating Temp32º - 122°F (0 - 50°C)
Ambient Humidity5% to 90% RH (non-condensing)
Altitude Limit6,562 ft. (2,000m)
Size/Weight8” D x 19” L x 5” W (203 x 483 x 127 mm)/ Less than 9 lbs (4 kg) w/battery
Valid Calibration Period1 Year
Warranty1 Year from date of shipment. Battery @ 6 months